What is a PMIC in a phone?
Short answer: A PMIC (Power Management Integrated Circuit) is the chip that turns battery power into the many smaller voltages a phone needs, and switches them on in the right order when the phone boots. A faulty PMIC often causes a dead phone, a boot loop or high current on the power supply.
What the PMIC does
The battery gives one voltage, but the processor, memory, display and radios each need their own. The PMIC creates these supply rails, controls the power-on sequence, and often handles the power button and reset signals.
Many phones also have a separate charging IC, and some have more than one PMIC.
Symptoms of a bad PMIC
- Phone completely dead, or high current as soon as power is connected
- Boot loop or restarting on the logo
- Missing voltages on rails that come from the PMIC
- Phone gets hot near the PMIC area
How technicians test it
Check the rails that leave the PMIC with a multimeter and compare them with the schematic or a good board. Look at the power-on current pattern on a DC power supply. Rule out shorted capacitors on the PMIC rails before replacing the chip itself.



