How to Troubleshoot And Repair a Dead Samsung Phone - VBUS/VPH Fault
Part 1 of How to Troubleshoot And Repair a Dead Samsung Phone - VBUS/VPH Fault, a mobile phone repair course on PlayFix.
This is a preview of a rewarded PlayFix lesson. Sign in to see its viewing options; playback is not available on this preview page.
Open lesson on PlayFixPhone not charging repair
Charging faults range from a dirty or damaged charging port to a shorted VBUS line, a failed over-voltage protection (OVP) chip or a damaged charging IC. Fake charging, where the phone shows the charging icon but the battery percentage does not rise, usually points to the charging path or battery communication rather than the charger.
Short circuit troubleshooting on phone boards
A shorted rail pulls voltage to ground and can make a phone dead, hot or unable to charge. The usual approach is to confirm the short with a multimeter, inject a limited voltage, then locate the heating component with a thermal camera, rosin flux or by touch.
What a technician checks
- Measure the charging current with a USB ammeter or DC power supply
- Check the VBUS line for a short to ground
- Inspect the OVP and charging IC area for burns or corrosion
- Confirm the battery connector and battery lines are healthy
- Confirm the short with the multimeter diode or resistance mode
- Inject a limited voltage and current into the shorted line